Preface To The Manual - Happy Fabric HappyPress Operating Manual

Preface to the Manual

This manual has been designed to be user friendly. Read it carefully, and follow the step-by-
step instructions, to get the best possible printing results.
Work very carefully and avoid contact with the hot plate. This could lead to serious burns.
Keep hands away during the closing operation of the heat plate. This could lead to
bruises and burns.
Use your press only on stable, steady and non-slip surfaces.
Check the press immediately after unpacking for any transport damage. Allow the press
to stand for several hours at room temperature before using to prevent the formation of
condensation, and thus avoid the risk of a possible short circuit.
Operate the press whilst standing, with both hands on the handle provided for this
purpose. The machine should stand at a level that is adapted to the height of the operator.
The optimum operating condition for your press is at
a maximum humidity of 70%, and an ambient temp-
erature between +15°C and +50°C.
Should any liquid or solid object get inside the unit,
immediately disconnect the power plug from the
wallsocket/outlet, and have the machine checked ca-
refully by an expert before it is used again.
No liability is assumed by the manufacturer for any
improper or nonintended use of the machine resulting in property or personal injury.
Preface to the Manual
TEMP
SET
MODE
www.happyfabric.de
21