Table of Contents
Advertisement
USER MANUAL
Adjusting the pressure
The pressure adjustment knob is located in the centre of the heat platen.
Adjust the pressure by turning the screw clockwise to increase pressure and coun-
ter-clockwise to decrease pressure.
If you are not satisfied with the printing results, change the pressure.
Remember:
Adjust the pressure with the garment inside the closed press to get exact results
Pressure
adjustment knob
Warning:
Structural damage caused by excessive pressure is not covered under the limited
warranty!
HappyFabric
HappyFabric.de
HappyFabric.de
27
Advertisement
Table of Contents
