Introduction To The Manual - Happy Fabric HappyPress 2.1 Operating Manual

INTRODUCTION TO THE MANUAL

Introduction to the Manual
This manual has been designed to be user friendly. Read it carefully, and follow the
step-by-step instructions to get the best possible printing results.
• Check the press immediately after unpacking for any transport damage. Allow
the press to stand for several hours at room temperature before using to pre-
vent the formation of condensation, and thus avoid the risk of a possible short
circuit.
• Take care and avoid contact with the hot plate to avoid injury.
Keep hands clear of heat platen while closing the press
• Use your press only on stable, steady and non-slip surfaces.
• Operate the press whilst standing, with both hands on the handle provided.
• The optimum operating condition for your press is at a maximum humidity of 70 %,
and an ambient temperature between +15 °C and +50 °C.
• Should any liquid or solid object get inside the unit, immediately disconnect the
power plug from the wallsocket/outlet, and have the machine checked carefully by
an expert before it is used again.
• No liability is assumed by the manufacturer for any improper or nonintended
use of the machine resulting in property or personal injury.
22
The snap closure is designed purely for
transport or for space-saving storage.
The snap closure does not have to be
closed for pressing.