Table of Contents
Advertisement
USER MANUAL
Temperature and time setting
Press the mode button on your control panel. The (SET) and (TEMP) lights located next
to the display will illuminate indicating you are in the Adjust Temperature Mode.
Use the Minus (-) button or the Plus (+) button to lower or raise the temperature until
the desired temperature appears in the display. You can set the temperature between
96°C and 221°C.
Press the mode button again to access the Adjust Time Mode. The (SET) and (TIME)
lights will illuminate, indicating you are in the Adjust Time Mode. Adjust the time in the
same manner that you adjusted temperature. The time can be set between 1 and 999
seconds.
Press the mode button to exit the time settings. The lights to the left of the display will
turn off. The current temperature will be displayed and the machine will start to heat up.
It takes around 12 minutes to reach 150° C. You can open the heat press while it heats up
or you can keep it closed.
Note
As long as one of the lights is lit next to the digital display the machine is in set up mode
and will not start heating up.
26
Set Temperature
Set Indicator
Time Indicator
Digital Display
„Increase" Button
„Mode" Button
„Decrease" Button
Advertisement
Table of Contents
