Important Safety Instructions - Happy Fabric HappyPress Operating Manual

Hide thumbs Also See for HappyPress:
Table of Contents

Advertisement

IMPORTANT SAFETY INSTROUCTIONS

Important Safety Instructions

Before you use your press, you should follow some basic precautions, including the
following:
Read the complete manual before you start to use your press. Use the press exclusi-
vely for printing textiles, or other suitable products that do not contain heat sensitive
components, and have not been treated with chemical additives.
Keep your press secure from rain, moisture, dirt, dust, direct sunlight, mechanical vibrati-
on or shock, as well as keeping it well away from highly flammable or explosive materials.
Never pull on the power cord to turn off your press, but always use the ON/OFF switch.
If the machine will not be used for long periods of time, pull the plug carefully from the
wall socket.
The power cord must not come into contact with the hot plate (upper platen).
Never use your press with a damaged or defective power cable. In the event of any
damage or defect, never remove the casing of your press, but discuss the problem
with a specialist who may be contacted during normal business hours by telepho-
ning (+49) 030/89 747 348. Opening the case will void the warranty on the press.
Avoid using the press in locations where children, or third parties have unsupervised
access to the press. The minimum distance for children, or other persons should be
at least 1.5 m away from the press to prevent burns and bruises.
When lifting the press for any reason you should grip the machine and not the
casing, as the casing contains plastic and delicate electronic components. Hold the
press at the base plate, or directly on the bottom. The press must be completely
cool and transported in the original box.
Before connecting the power cable check that the operating mains voltage will be
230 V. The outlet must be fused with at least 10 amps. You should only connect one
machine to a mains socket, and not use an extension lead.
When using the machine for printing, it should never be left unattended (danger of
fire). Please take care when loading the machine that it is fully open to avoid any
burns.
Keep these instructions in a safe place.
22

Advertisement

Table of Contents
loading

Table of Contents