Powerboost; Timer - Siemens HC748 40 Series Instruction Manual

Table of Contents

Advertisement

Frying**
Cutlet, plain or breaded
Frozen cutlets
Chop, plain or breaded
Steak (3 cm thick)
Poultry breast (2 cm thick)
Poultry breast, frozen
Fish and fish fillet plain
Fish and fish fillet breaded
Fish and fish fillet, breaded and frozen, e.g. fish fingers
Scampi and prawns
Pan-fried meals, frozen
Pancakes
Omelette
Fried eggs
Deep-fat frying (deep-fat fry 150 g ­200 g per portion consecutively in 1­2 litres oil**)
Frozen products, e.g. chips, chicken nuggets
Croquettes
Rissoles
Meat, e.g. chicken portions
Fish breaded or in beer batter
Vegetables, mushrooms breaded or in beer batter
Small deep-fried items, e.g. ring doughnuts/jam doughnuts, fruit in beer batter
* Ongoing cooking without lid
** Without lid

Powerboost

The powerboost function temporarily increases the power of the
highest heat setting. Food is heated up particularly quickly.
Powerboost is available for all hotplates.
Restriction
The hob consists of 2 groups:
Group 1 = left hotplates
Group 2 = right hotplates




Powerboost can only be selected for one hotplate in each
group. The second hotplate must not be in use. If the second
hotplate is in use,
and
Š
Powerboost is not activated. The hotplate heats up at heat
setting 9.
Activating powerboost
Set heat setting 9.
1.
Touch
.
@›
2.
appears in the display. Powerboost is activated.
Deactivating powerboost
Touch the
symbol.
@›
disappears from the display. Powerboost is deactivated.
Note: Powerboost automatically switches off if there is a risk of
the hob overheating.
12
flash alternately in the display.
Ongoing cooking
setting
6-7
6-7
6-7
7-8
5-6
5-6
5-6
6-7
6-7
7-8
6-7
6-7
3-4
5-6
8-9
7-8
7-8
6-7
6-7
6-7
4-5

Timer

You can use the timer in two different ways:
for automatic hotplate switch-off.
as a kitchen alarm.
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically. You can set a cooking time of up to 99 minutes.
Selecting a hotplate and setting the heat setting.
1.
Touch the
symbol.
0
2.
min appears in the timer display. The
‹‹
that the timer has been selected.
lights up above the heat setting display.
Set the cooking time on the control panel.
3.
To do this, slide your finger repeatedly over the control panel
until the desired cooking time appears or keep touching a
point on the control panel until the desired cooking time
appears:
In the left-hand half ­ the minutes count back
In the right-hand half ­ the minutes count forward.

After a few seconds, the timer starts counting down.
When the cooking time has elapsed, the hotplate switches off.
You will hear a signal.
‹‹
seconds.
appears in the heat setting display and
brightly. Touch the
0
symbol. The displays go out and the
audible signal ceases.
Changing or cancelling the cooking time.
Touch the
repeatedly until
0
Ongoing cooking
time in minutes
6-10
8-12
8-12
8-12
10-20
10-30
8-20
8-20
8-12
4-10
6-10
consecutive
consecutive
3-6
deep-fat fry one por-
tion after the other
arrow indicates
N
x
for the cooking time

lights up in the timer display for 10
x
lights up brightly over the
x
lights up

Advertisement

Table of Contents
loading

Table of Contents