H3C S12500 Series Software Upgrade page 9

5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms
# Save the configuration.
<Device> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
Slot 1 Cpu 0:
Save next configuration file successfully.
# Identify MPUs on the device.
<Device> display device
Slot No. Brd Type
0 LST2MRPNC1
1 LST2MRPNC1
2 NONE
3 LST1GT48LEC1
4 NONE
5 NONE
6 NONE
7 NONE
8 NONE
9 NONE
10 NONE
11 NONE
12 NONE
13 NONE
14 LST2SF08C1
15 NONE
16 NONE
17 NONE
18 NONE
The output shows that the switch has two MPUs: one active MPU in slot 0 and one standby MPU
in slot 1. You must upgrade both MPUs.
# Use the username 123456 and the password 123456 to log in to the FTP server.
<Device> ftp 192.168.100.14
Connected to 192.168.100.14 (192.168.100.14).
220 3Com 3CDaemon FTP Server Version 2.0
User (192.168.100.14:(none)): 123456
331 User name ok, need password
Password:
230 User logged in
Remote system type is UNIX.
Using binary mode to transfer files.
Brd Status Software Version
Master s12500-CMW710-R7328P01
Standby s12500-CMW710-R7328P01
Absent NONE
Normal s12500-CMW710-R7328P01
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Normal s12500-CMW710-R7328P01
Absent NONE
Absent NONE
Absent NONE
Absent NONE