H3C S12500 Series Software Upgrade page 5

(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
Slot 1 Cpu 0:
Save next configuration file successfully.
# Identify MPUs on the device.
<Device> display device
Slot No. Brd Type
0 LST2MRPNC1
1 LST2MRPNC1
2 NONE
3 LST1GT48LEC1
4 NONE
5 NONE
6 NONE
7 NONE
8 NONE
9 NONE
10 NONE
11 NONE
12 NONE
13 NONE
14 LST2SF08C1
15 NONE
16 NONE
17 NONE
18 NONE
The output shows that the device has two MPUs: one active MPU in slot 0 and one standby MPU
in slot 1. You must upgrade both MPUs.
# Use TFTP to download the upgrade file from the TFTP server to the root directory of the storage
medium on the active MPU.
<Device> tftp 192.168.100.14 get s12500.ipe
% Total % Received % Xferd Average Speed
100 70.7M 100 70.7M
# Specify the upgrade file as the main startup image file for both MPUs.
<Device> boot-loader file flash:/s12500.ipe slot 0 main
Verifying image file.........Done.
Images in IPE:
S12500-CMW710-BOOT-test.bin
S12500-CMW710-SYSTEM-test.bin
This command will set the main startup software images. Continue? [Y/N]:y
Decompressing file S12500-CMW710-BOOT-test.bin to cfa0:/S12500-CMW710-BOOT-test.bin
..................................................Done.
Decompressing file S12500-CMW710-SYSTEM-test.bin to cfa0:/S12500-CMW710-SYSTEM
-test.bin...................................................................
................................................................................
Brd Status Software Version
Master S12500-CMW710-R7328P01
Standby S12500-CMW710-R7328P01
Absent NONE
Normal S12500-CMW710-R7328P01
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Normal S12500-CMW710-R7328P01
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Dload Upload
0 0 1193k 0 0:00:50 0:00:50 --:--:-- 1127k
Time Time
Total Spent Left Speed
Time Current