H3C S12500 Series Software Upgrade page 21

|<7> Skip Authentication for Console Login
|<8> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-8):
# Enter 3 in the EXTEND-BOOTWARE menu to access the Ethernet submenu.
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0
|<1> Download Image Program To SDRAM And Run
|<2> Update Main Image File
|<3> Update Backup Image File
|<4> Download Files(*.*)
|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
============================================================================
Enter your choice(0-5):
# Enter 5 in the Ethernet submenu to configure the network settings.
Enter your choice(0-5):5
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field.
| '-' = Go to previous field.
| Ctrl+D = Quit.
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name
Target File Name
Server IP Address
Local IP Address
Subnet Mask
Gateway IP Address
Table 1 Network parameter fields
Field
'.' = Clear field
'-' = Go to previous field
Ctrl+D = Quit
Load File Name
Target File Name
:s12500.ipe
:
:s12500.ipe
:
: 192.168.1.100 192.168.100.14
: 192.168.1.1 192.168.100.66
:255.255.255.0
: 0.0.0.0
Description
Press the dot (.), and then press Enter to clear the setting for a
field.
Press the hyphen (-), and then press Enter to return to the
previous field.
Press Ctrl+D to exit the Ethernet parameter settings menu.
Set the name of the file to be downloaded.
Set a file name for saving the file on the device. By default, the
target file name is the same as the source file name.
|
|
|
|
|
|
|
|
|
|
|
|
|
|