H3C S12500 Series Software Upgrade page 10

# Use FTP to download the upgrade file from the FTP server to the root directory of the storage
medium on the active MPU.
ftp> get s12500.ipe
227 Entering passive mode (192,168,100,14,8,86)
125 Using existing data connection
226 Closing data connection; File transfer successful.
70445056 bytes received in 53.6 seconds (1.25 Mbyte/s)
ftp> quit
# Specify the upgrade file as the main startup image file for both MPUs.
<Device> boot-loader file flash:/s12500.ipe slot 0 main
Verifying image file.........Done.
Images in IPE:
S12500-CMW710-BOOT-test.bin
S12500-CMW710-SYSTEM-test.bin
This command will set the main startup software images. Continue? [Y/N]:y
Decompressing file S12500-CMW710-BOOT-test.bin to cfa0:/S12500-CMW710-BOOT-test.bin
..................................................Done.
Decompressing file S12500-CMW710-SYSTEM-test.bin to cfa0:/S12500-CMW710-SYSTEM
-test.bin...................................................................
................................................................................
......................................Done.
This command will set the main startup software images. Continue? [Y/N]:y
The images that have passed all examinations will be used as the main startup so
ftware images at the next reboot on slot 0.
<Device> boot-loader file boot flash:/s12500-CMW710-BOOT-test.bin system
flash:/s12500-CMW710-SYSTEM-test.bin slot 1 main
This command will set the backup startup software images. Continue? [Y/N]:y
The images that have passed all examinations will be used as the main startup so
ftware images at the next reboot on slot 1.
# Specify the current startup image file as the backup startup image file for both MPUs. This
setting ensures that the device can start up if the upgrade file is corrupt or not correct.
<Device> boot-loader file boot flash:/s12500-CMW710-BOOT-old.bin system
flash:/s12500-CMW710-SYSTEM-old.bin slot 0 backup
This command will set the backup startup software images. Continue? [Y/N]:y
The images that have passed all examinations will be used as the backup startup software
images at the next reboot on slot 0.
<Device> boot-loader file boot flash:/s12500-CMW710-BOOT-old.bin system
flash:/s12500-CMW710-SYSTEM-old.bin slot 1 main
This command will set the backup startup software images. Continue? [Y/N]:y
The images that have passed all examinations will be used as the main startup so
ftware images at the next reboot on slot 1.
# Reboot the device.
<Device> reboot
Verifying the configuration
1. Verify that the software has been upgraded.
<Device> display version
H3C Comware Software, Version 7.1.045, Release 7328P02
Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.