H3C S12500 Series Software Upgrade page 14

1 LST2MRPNC1
2 NONE
3 LST1GT48LEC1
4 NONE
5 NONE
6 NONE
7 NONE
8 NONE
9 NONE
10 NONE
11 NONE
12 NONE
13 NONE
14 LST2SF08C1
15 NONE
16 NONE
17 NONE
18 NONE
The output shows that the device has two MPUs: one active MPU in slot 0 and one standby MPU
in slot 1. You must upgrade both MPUs.
# Specify the upgrade file as the main startup image file for both MPUs.
<Device> boot-loader file flash:/s12500.ipe slot 0 main
Verifying image file.........Done.
Images in IPE:
S12500-CMW710-BOOT-test.bin
S12500-CMW710-SYSTEM-test.bin
This command will set the main startup software images. Continue? [Y/N]:y
Decompressing file S12500-CMW710-BOOT-test.bin to cfa0:/S12500-CMW710-BOOT-test.bin
..................................................Done.
Decompressing file S12500-CMW710-SYSTEM-test.bin to cfa0:/S12500-CMW710-SYSTEM
-test.bin...................................................................
................................................................................
......................................Done.
This command will set the main startup software images. Continue? [Y/N]:y
The images that have passed all examinations will be used as the main startup so
ftware images at the next reboot on slot 0.
<Device> boot-loader file boot flash:/s12500-cmw710-boot-test.bin system
flash:/s12500-CMW710-SYSTEM-test.bin slot 1 main
This command will set the backup startup software images. Continue? [Y/N]:y
The images that have passed all examinations will be used as the main startup so
ftware images at the next reboot on slot 1.
# Specify the current startup image file as the backup startup image file for both MPUs. This
setting ensures that the device can start up if the upgrade file is corrupt or not correct.
<Device> boot-loader file boot flash:/s12500-CMW710-BOOT-old.bin system
flash:/s12500-CMW710-SYSTEM-old.bin slot 0 backup
This command will set the backup startup software images. Continue? [Y/N]:y
The images that have passed all examinations will be used as the backup startup so
ftware images at the next reboot on slot 0.
Standby s12500-CMW710-R7328P01
Absent NONE
Normal s12500-CMW710-R7328P01
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Absent NONE
Normal s12500-CMW710-R7328P01
Absent NONE
Absent NONE
Absent NONE
Absent NONE