H3C S12500 Series Software Upgrade page 15

<Device> boot-loader file boot flash:/s12500-cmw710-boot-test.bin system
flash:/s12500-CMW710-SYSTEM-old.bin slot 1 main
This command will set the backup startup software images. Continue? [Y/N]:y
The images that have passed all examinations will be used as the main startup so
ftware images at the next reboot on slot 1.
# Reboot the device.
<Device> reboot
Verifying the configuration
1. Verify that the software has been upgraded.
<Device> display version
H3C Comware Software, Version 7.1.045, Release 7328P02
Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.
H3C 12508 uptime is 0 weeks, 0 days, 12 hours, 8 minutes
Last reboot reason : Power on
Boot image: flash:/s12500-cmw710-boot-test.bin
Boot image version: 7.1.045, Release 7328P02
Compiled Jul 28 2014 17:32:35
System image: flash:/s12500-cmw710-system-test.bin
System image version: 7.1.045, Release 7328P02
Compiled Jul 28 2014 17:32:35
---- More ----
2. Verify that the software images on the MPUs are the same:
# Display the current software images and startup software images on the active MPU.
<Device> display boot-loader slot 0
Software images on slot 0:
Current software images:
flash:/s12500-cmw710-boot-test.bin
flash:/s12500-cmw710-system-test.bin
Main startup software images:
flash:/s12500-cmw710-boot-test.bin
flash: s12500-cmw710-system-test.bin
Backup startup software images:
flash:/s12500-cmw710-boot-old.bin
flash:/s12500-cmw710-system-old.bin
# Display the current software images and startup software images on the standby MPU.
<Device> display boot-loader slot 1
Software images on slot 1:
Current software images:
flash:/s12500-cmw710-boot-test.bin
flash: s12500-cmw710-system-test.bin
Main startup software images:
flash:/s12500-cmw710-boot-test.bin
flash: s12500-cmw710-system-test.bin
Backup startup software images:
flash:/s12500-cmw710-boot-old.bin
flash:/s12500-cmw710-system-old.bin