Observe the occurring extraction forces acting on the fixing anchors and screws. The rated extraction force is 350 N. The maximum permitted working load of the Z5442 Wall mount column is 16 kg (35 lb), which corresponds to the weight of a complete 24C/24C-E assembly.
24C cabinet, as shown in the graphic opposite. 1.3. Intended use The d&b Z5442 Wall mount column must only be used in conjunction with applicable d&b column loudspeakers. It is intended for direct wall mounting.
3. Take off the wall plate. Preparing the cabinet connecting plate [1c] 1. Insert all Allen hex screws [2] into the connecting plate [1c]. 2. Fit the T-slot nuts [3] to the screws and turn the nuts 3-4 times. d&b Z5442 Mounting instructions 1.1 en...
Page 7
2. Insert the Allen hex screw [A] and attach the U washers [U] and the self-securing nut [N]. 3. Slightly tighten the nut. 4. Set your desired horizontal aiming. 5. Finally tighten the nut to fix the cabinet in its horizontal position. d&b Z5442 Mounting instructions 1.1 en...
Page 8
3. Set the desired vertical downtilt. 4. Adjust the stop screw [B] until the desired angle is finally set. 5. Tighten the counter nut [C] to fix the adjustment. 6. Retighten the fixing bolt [F]. d&b Z5442 Mounting instructions 1.1 en...
From left: Total height of single 16C and 24C columns, total height of 24C with 24C-E extender, maximum depth and distance to the wall. Built-in dimensions at 15° downtilt in mm [inch] From left: Total height and depth of single 16C and 24C columns and 24C with 24C-E extender. d&b Z5442 Mounting instructions 1.1 en...
4. Declarations 4.1. Manufacturer's declaration This declaration covers: – d&b Z5442 , Wall mount column. National standards and technical specifications applied: DIN 18 800, DIN 1055, BGV C1. Backnang, 2014-02-04 Frank Bothe, Head of R&D d&b audiotechnik GmbH 4.2. Disposal When out of use the rigging components must be disposed of in accordance with the national environmental regulations.