Z5408 Horizontal bracket 8S 1.1 Scope of supply Please verify the shipment for completeness and proper condition of the items. Qty. d&b Code Description Z5408 d&b Horizontal bracket 8S [1] Including: Hex head bolt M8 x 25 [2] Spring washer [3] U washer [4] Scope of supply Rubber washer [5]...
1.4 Mounting options and angle settings Mounting holes are provided on the tie bar of the bracket. One 9 mm (0.35") hole is provided at each end of the tie bar for fixing the bracket directly to walls or ceilings or other suitable Z5408 Mounting holes surfaces.
Page 6
Attaching the cabinet to the bracket NOTICE! ▪ Only use the supplied and specified screws [2], otherwise there is a risk of damaging the threaded inserts. ▪ Always use the spring washers [3] and U washers [4] to prevent the bolts from slackening. Tools required: ▪...
Declarations 4.1 Manufacturer's declaration This declaration covers: ▪ d&b Z5408 Horizontal bracket 8S. National standards and technical specifications applied: DIN 18 800, DIN 1055, DGUV Vorschrift 17, BGI 810-3. Backnang, 2011-03-25 Frank Bothe, Chief Technology Officer (CTO) d&baudiotechnik GmbH & Co. 4.2 Disposal When out of use the rigging components must be disposed of in accordance with the national environmental regulations.