Assembly - d&b audiotechnik Z5442 Mounting Instructions

2. Assembly

6
Tools required
– Open-ended spanner/wrench size #13 mm
– Torque wrench with Allen key insert size #5 mm
– Torque wrench with Allen key insert size #6 mm
T-slot nut principle
The T-slot nut is a specially shaped nut which allows easy fitting.
It is simply inserted into the T-slot profile and turned through 90°
for final positioning.
Dismounting the wall plate [1a]
1. Slacken and remove the self-securing nut [N].
2. Remove the U washers [U] and the Allen hex screw [A].
3. Take off the wall plate.
Preparing the cabinet connecting plate [1c]
1. Insert all Allen hex screws [2] into the connecting plate [1c].
2. Fit the T-slot nuts [3] to the screws and turn the nuts 3-4 times.
d&b Z5442 Mounting instructions 1.1 en