d&b audiotechnik Z5442 Mounting Instructions page 8

Vertical alignment
The wall mount is equipped with a stop screw [B] to allow a
precise vertical alignment of the cabinet.
1. Slacken the stop screw [B].
2. While a second person secures the cabinet, slightly slacken
the fixing bolt [F].
3. Set the desired vertical downtilt.
4. Adjust the stop screw [B] until the desired angle is finally set.
5. Tighten the counter nut [C] to fix the adjustment.
6. Retighten the fixing bolt [F].
8 d&b Z5442 Mounting instructions 1.1 en