Fujitsu PRIMERGY CX122 S1 Service Supplement Manual page 24

Preparations
Ê If missing, fit two cage nuts in the corresponding notches on the left and right
support uprights.
Figure 6: Mounting a server in the rack (B)
Ê Insert the server into the rack at the desired installation position.
Ê Slide the server in the direction of the arrow until it stops (1).
I
By doing so, the PRIMERGY CX122 S1 power supply will be
connected automatically with the power distribution unit in the
CX1000 S1 system unit.
Ê Secure the server with two knurled screws (2).
22 Service Supplement
PRIMERGY CX122 S1