Replacing The System Board - Fujitsu PRIMERGY CX122 S1 Service Supplement Manual

4.7

Replacing the system board

Ê Open the server as described in
Ê Remove all cables from the system board.
Ê Remove the following components from the system board as shown in the
related sections:
– Heat sinks:
– Processors:
– Memory modules:
– Expansion cards:
– PCI riser card:
PRIMERGY CX122 S1
section "Removing a heat sink" on page 58
section "Removing a processor" on page 60
section "Removing a memory module" on page 73
section "Replacing expansion cards" on page 48
section "Replacing the PCI riser card" on page 53
Service Supplement
Replacing the system board
System board D2899
Part number:
S26361-D2899-A100
section "Opening the server" on page 31.
77