Chapter 7: Replacing A Fan - Avaya S8730 Maintaining Manual

Chapter 7: Replacing a fan

Prerequisites
• Shut down the server.
• Remove the server from the rack.
• Remove the server cover.
When a fan fails, its LED lights amber on the system insight display. The position of the LED on the display
corresponds to the position of the fan in the server. Four fans are located at the front of the server and
two are located in front of the PCI riser cage.
Refer to the following graphic for steps to replace a fan in any location within the chassis.
Maintaining the Avaya S8730 Server for Modular Messaging June 2009 45