Table of Contents
Advertisement
Table 10.6 Common Events (continued)
Component
Subcomponent
Board Name
—
Board Name
Board Name
—
[BAM # or EIB if
Board Name
applicable]
10 Faults, Warnings and Events
Type
Event Name
ID
Config Retrieval
19
Error
Communication
EIB
Status
20
Fail
Fault
FW Incompatible
21
Communication
Alarm
22
Bus Error
Latching
Definition
N
Communication has been lost to this board (HMI or Peripheral board
for DSPs) for 20 seconds. The HMI detects comm fails to the
monitoring boards and sends an event to each respective board once
N
comms are restored. A separate event is needed to show the Comms
Fail to the EIB at the system level especially when detected at PBM or
SFM (as opposed to every subfeed for example, like the BAM).
Use by HMI. No logging. HMI sees a mismatch in configuration
N
schema or version number between HMI and monitor board.
The condition is when TX or RX stops for 10 seconds. The event is
detected at a board when the condition above occurs 5 times within a
N
24 hour sliding window. The event will clear when the occurrences are
3 or less in the 24 hour window.
75
Advertisement
Table of Contents
