Table of Contents
Advertisement
Figure 4.1 Log In to the Touchscreen Control Panel
ITEM
DESCRIPTION
1
PIN shown when entered
2
LOG IN icon
3
Enter button
4
Keypad
To set a PIN:
1.
Log in as Administrator or higher.
2. Touch SETUP at the top of the screen.
3. Touch the Role whose PIN will be set or changed.
4. Touch the PIN value on the right side of the Touchscreen Control Panel.
5. Enter a PIN using the on-screen keypad, shown below (the PIN may be up to nine digits).
6. Press the Enter key or OK button.
7. Press the Save button.
24
Vertiv™ | User Manual
Advertisement
Table of Contents
