Table of Contents
Advertisement
Figure 2.2 Opening Screen - PIN Required
Figure 2.3 Opening Screen - No PIN Required; Opens to Administrator Level
To set or change a PIN:
1.
Log in to the Liebert® DPM at the Administrator level (neither Observers nor Operators can change PINs).
2. Touch SETUP. The MANAGE PIN NUMBERS menu opens; either the Operator or Administrator PIN may be
changed.
3. Touch the PIN to be changed and a keypad opens.
4. Enter the new PIN or delete the numerals to delete PIN requirements.
5. Touch the OK button.
6. Touch the Save button to keep your changes or touch the Cancel button to exit without saving.
NOTE: To delete PIN requirements, such as for a PDU or RPP in a secure area with restricted access, remove the PIN
for the Operator level first, then delete the Administrator PIN. The Operator PIN must be empty before the
Administrator PIN can be deleted. If an attempt is made to delete the Administrator's PIN first, the Touchscreen
Control Panel will display a notice that the Operator's PIN is not empty. Conversely, the Administrator's PIN must be
completed first if conditions change and PINs become required.
2 Touchscreen Display and User Interface
7
Advertisement
Table of Contents
