Figure 7.1 Panelboard Configuration
ITEM
DESCRIPTION
1
Selected component
2
Drop-down arrow to open different top-level component
3
Graphical/Text display box
4
Configuration tab chosen
5
Save button (inactive until change is made)
6
Cancel button (inactive until change is made)
7
Clear Panel button (removes all breakers from panel)
Additional settings, not shown in Figure 7.1 above, which may be viewed by scrolling down, are: Neutral
Overcurrent, Enabled/Disabled, Threshold;
•
Ground Overcurrent: Enabled/Disabled, Threshold
•
Tripped: Enabled/Disabled
•
Accessory Fail: Enabled/Disabled
•
Event Detect Delay: Seconds
4. To enable or disable a fault or warning, touch the associated box.
48
Vertiv™ | User Manual