Vertiv Liebert DPM User Manual page 77

Table 10.4 HMI User Events
Component Subcomponent
Component
—
Name
Component
—
Name
Component
—
Name
Board Name [BAM #]
Component
—
Name
Table 10.5 Custom Events
Component Subcomponent
Board Name EIB
Board Name EIB
Board Name EIB
Board Name EIB
Board Name EIB
Board Name EIB
Board Name EIB
Board Name EIB
Board Name EIB
Board Name EIB
10 Faults, Warnings and Events
Type Event Name ID Latching
Comms
Fault 13 N
Misconfig
No Initial
Fault 14 N
Comms
Config Sync
Fault 19 N
Error
Fault Comm Fail 12 N
FW
Fault 21 N
Incompatible
Type Event Name ID
Internal Input
Alarm 600
Contact 1
Internal Input
Alarm 601
Contact 2
Internal Input
Alarm 602
Contact 3
Internal Input
Alarm 603
Contact 4
Internal Input
Alarm 604
Contact 5
Internal Input
Alarm 605
Contact 6
Internal Input
Alarm 606
Contact 7
Internal Input
Alarm 607
Contact 8
External Input
Alarm 608
Contact 1
External Input
Alarm 609
Contact 2
Definition
Displayed at the HMI but not logged.
Displayed at the HMI but not logged.
Displayed at the HMI but not logged.
Communication has been lost to this board (HMI or Peripheral board for
DSPs) for 20 seconds. The HMI detects comm fails to the monitoring
boards and sends an event to each respective board once comms are
restored.
There is a Display to Control version or schema incompatibility. The user
can view the display and control firmware versions and perform updates
to either the display or the control in order to make them compatible.
Latching Definition
Internal alarm is active. Default text: "High Temp Alarm". Does not
L
trip input breaker.
L Internal alarm is active.
L Internal alarm is active.
L Internal alarm is active.
L Internal alarm is active.
L Internal alarm is active.
L Internal alarm is active.
L Internal alarm is active.
L Customer alarm is active.
L Customer alarm is active.
73