Vertiv Liebert DPM User Manual page 38

To change the Output Contact settings:
1. Log in with Administrator or Service access.
2. Touch SETUP > Context Menu > Output Contact.
3. Select an output contact to change by touching the name on the left side of the Touchscreen Control Panel.
4. Touch the Assigned Event dialog box to select an event and assign it to the contact.
5. Touch the Save button to keep your change or touch the Cancel button to discard the change.
Figure 5.5 Change Output Contact's Assigned Event
ITEM DESCRIPTION
1 Output Contact selected
2 Assigned Event choices
34
Vertiv™ | User Manual