Slush Freezer Troubleshooting Chart; Product Will Not Freeze; Poor Or Slow Product Recovery; Troubleshooting Chart (P/N Hc184262) - ELECTRO FREEZE 812 Operator's Manual

OPERATOR COMPLAINT IS:

"PRODUCT WILL NOT FREEZE"

CHECK PRODUCT BRIX
ADJUST TO 11-13% BRIX*
CHECK TO IF WATER
SEE IF TOP COOLED
TORQUE CHECK
SPRING IS FOR WATER
ATTACHED FLOW
BLOCKAGE
TURN WATER
SUPPLY ON IF
OFF
REPOSITION
WATER LINES
IF KINKED
IF PROBLEM PERSISTS
CONTACT H. C. DUKE & SON, INC. / ELECTRO FREEZE
SERVICE DEPARTMENT AT
800/755-4545
* ON FREEZERS WITH AUTO-FILL SYSTEM, BRIX FILL STATION TO PRODUCT SUPPLIERS RECOMMENDATION (MINIMUM 11% BRIX).
7/04
Slush Freezer
Troubleshooting Chart
IF AIR
COOLED
CHECK FOR
AIR INTAKE/
DISCHARGE
BLOCKAGE
MOVE
OBSTRUCTION
OR MOVE
FREEZER MUST
HAVE AT LEAST
6" CLEARANCE
OPERATOR COMPLAINT IS:

"POOR OR SLOW PRODUCT RECOVERY

CHECK PRODUCT BRIX
ADJUST TO 11-13% BRIX*
CHECK PRECOOL
SCRAPER PRODUCT
BLADES WARM
IF WORN PRODUCT
REPLACE WILL
RESULT IN
SLOW
RECOVERY
IF PROBLEM PERSISTS
CONTACT H. C. DUKE & SON, INC. / ELECTRO FREEZE
SERVICE DEPARTMENT AT
800/755-4545
"
IF AIR CHECK
COOLED FREEZER
CHECK FOR CAPACITY
AIR INTAKE/ RATING
DISCHARGE DISPENSING
BLOCKAGE TOO LARGE
OF VOLUME
AT ONE TIME
MOVE
OBSTRUCTION
OR MOVE
FREEZER
MUST HAVE
AT LEAST 6"
CLEARANCE
184262