Video Management - HIKVISION DS-PW32-H Series User Manual

Note
Some detectors may not support this function.
5. Click OK.
Note
After the siren is configured, you can click Status → Siren to
view the siren status.
Repeater
If the detector is far away from the control panel, set the repeater
parameters to enlarge the signal.
Steps
1. Click Wireless Device → Repeater to enter the Repeater page.
2. Click
to set the repeater parameters.
3. Edit the repeater's name.
4. Enable Link Wireless Repeater and input the repeater serial
No.
5. Click OK.
Note
After setting the repeater, you can enter Status → Repeater to
view the repeater status.

2.3.4 Video Management

You can add two network cameras to the wireless security control
panel, and link the camera with the selected zone for video
monitoring. You can also receive and view the event video via
client and Email.
Add Cameras to the Security Control Panel
Steps
1. Click System → Network Camera to enter the network camera
management page.
Figure 2-30 Repeater Page
Figure 2-31 Repeater Settings
79