Table of Contents
Advertisement
• Battery: You can view the battery charge.
• Communication: You can view the wired network mode, Wi-Fi
status, Wi-Fi signal strength, cellular network status, used data,
and cloud connection status.
2.3 Configuration
Configure the security control panel in the web client or the
remote configuration page in client software.
2.3.1 Activation
In order to protect personal security and privacy and improve the
network security level, you should activate the device the first
time you connect the device to a network.
You can create an activation password to protect your device
from logging in by other persons.
Activate Device via iVMS-4200
is a PC client to manage and operate your devices. Security
control panel activation is supported by the software.
Before You Start
• Get the client software from the supplied disk or the official
website http://www.hikvision.com/en/ . Install the software
by following the prompts.
• The device and the PC that runs the software should be in the
same subnet.
Steps
1. Run the client software.
2. Enter Device Management or Online Device.
3. Check the device status from the device list, and select an
inactive device.
4. Click Activate.
5. Create and confirm the admin password of the device.
Caution
STRONG PASSWORD RECOMMENDED-We highly recommend
you create a strong password of your own choosing (using a
minimum of 8 characters, including upper case letters, lower
case letters, numbers, and special characters) in order to
increase the security of your product. And we recommend you
reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better
protect your product.
6. Click OK to start activation.
Device status will change to Active after successful activation.
7. Edit IP address of the device.
1) Select a device and click Modify Netinfo at Online Device.
2) Change the device IP address to the same subnet with your
computer by either modifying the IP address manually or
checking DHCP.
3) Input the admin password of the device and click OK to
complete modification.
Activate via SADP
66
Advertisement
Table of Contents
