Configuration Via Mobile Client - HIKVISION DS-PW32-H Series User Manual

Delay
When the early alarm function is enabled, you should set the
delay time. The alarm will be triggered after the configured
delay time.
Check Status
After setting the zone, repeater, and other parameters, you can
view their status.
Click Status. You can view the status of zone, relay, siren, battery,
communication, and repeater.
• Zone: You can view the zone status, alarm status, detector
battery capacity, and signal strength.
• Siren: You can view siren status, battery status, and signal
strength.
• Relay: You can view relay status, battery status, and signal
strength.
• Battery: You can view the battery charge.
• Communication: You can view the wired network mode, Wi-Fi
status, Wi-Fi signal strength, cellular network status, used data,
and cloud connection status.

1.6.3 Configuration via Mobile Client

Download and Login the Mobile Client
Download the Hik-Connect mobile client from Google Play (for
Android) or App store (for iOS) and login the client before
operating the security control panel.
Steps
1. Search and download Hik-Connect mobile client from Google
Play (for Android) or App Store (for iOS).
2. Optional: Register a new account if it is the first time you use
the Hik-Connect mobile client.
Note
For details, see User Manual of Hik-Connect Mobile Client.
3. Run and login the client.
Add Control Panel to the Mobile Client
Add a control panel to the mobile client before other operations.
Steps
1. Power on the control panel.
2. Select adding type.
- Tap → Scan QR Code to enter the Scan QR code page.
Scan the QR code on the control panel.
Note
Normally, the QR code is printed on the label sticked on the
back cover of the control panel.
- Tap → Manual Adding to enter the Add Device page.
Input the device serial No. with the Hik-Connect Domain
adding type.
3. Connect to a network.
1) Tap Connect to a Network.
32