Chapter 4 The Stm32F405 Microcontroller; Introduction To The Chapter; The Stm32F405Rg Features - OLIMEX STM32-H405 User Manual

Table of Contents

Advertisement

OLIMEX© 2016

CHAPTER 4 THE STM32F405 MICROCONTROLLER

4. Introduction to the chapter

Some of the details about the main processor in the design of STM32-H405 (STM32F405RG) are
mentioned in this chapter. The information is a modified version of the datasheet provided by its
manufacturers from ST.
It is highly recommended to refer to the original datasheet which might be downloaded from the
ST's official web-side.

4.1 The STM32F405RG features

STM32-H405 board uses STM32F405RG microcontroller designed and manufactured by
STMicroelectronics. It has the following features that distinguish it from the rest of the family:
 Core: ARM 32-bit Cortex™-M4 CPU with FPU, Adaptive real-time accelerator (ART
Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168
MHz, memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP
instructions
 Memories
 1 Mbyte of Flash memory
 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM
 Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR
and NAND memories
 LCD parallel interface, 8080/6800 modes
 Clock, reset and supply management
 1.8 V to 3.6 V application supply and I/Os
 POR, PDR, PVD and BOR
 4-to-26 MHz crystal oscillator
 Internal 16 MHz factory-trimmed RC (1% accuracy)
 32 kHz oscillator for RTC with calibration
 Internal 32 kHz RC with calibration
 Sleep, Stop and Standby modes
 VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM
 3×12-bit, 2.4 MSPS A/D converters: 24 channels and 7.2 MSPS in triple interleaved mode
 2×12-bit D/A converters
 General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
 Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4
IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
 Debug mode
 Serial wire debug (SWD) & JTAG interfaces
 Cortex-M4 Embedded Trace Macrocell™
 114 I/O ports with interrupt capability
 Up to 15 communication interfaces
 3 × I2C interfaces (SMBus/PMBus)
 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
Page 14 of 30
STM32-H405 user's manual

Advertisement

Table of Contents
loading

Table of Contents