Verify Parts List Below; Tools Required; Assembly Procedure - CYBEX Prestige Total Access Cable Column Owner's Manual

Do not install, use or store the unit in an area of high humidity, such as in the vicinity of a steam room, sauna,
indoor pool or outdoors. Exposure to extensive water vapor, chlorine and/or bromine could adversely affect other
parts of the unit.
Temperature
The unit is designed to function normally in an environment with an ambient temperature range of 50° F (10° C)
to 104° F (40° C). The unit can be shipped and stored in an environment with an ambient temperature range of 32°
F (0° C) to 140° F (60° C).

Verify parts list below

Qty Part Number
5
1
11
14

Tools Required

• 7/32" Allen wrench
• 3/4" Socket wrench or Open end wrench
• Torque wrench
• Phillips screwdriver
• Medium weight automotive engine oil

Assembly Procedure

Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully.
If there is damage, see the Customer Service section of this manual for proper procedure to return, replace,
or reorder parts.
If machine CAN be moved without adding or removing weight stack
Two people will be required for this procedure
1. Move to desired location.
2. Remove shipping cones using a 3/4" socket or wrench.
12090-322
14000-401
4000C101 Weight Stack Plate (Standard)
4000C101 Weight Stack Plate (Heavy)
Description
Foot Pad
Decal, Weight Plate
Page 10 of 25
Diagram