Sentek EnviroSCAN SOLO Hardware Manual page 18

3. The red light will come on indicating that the SoloPORTER should not be removed. The green light will blink
until the SoloPORTER finishes downloading. The green light becomes solid to indicate a successful download.
4. When the SoloPORTER is removed, the status lights will repeat the previous status codes.
NOTE: If the red light blinks please refer to SoloPORTER Manual or Quick Reference Guide for
5. Remove USB drive from SoloPORTER and insert into your computer
6. A wizard will automatically be launched, select "Download from SoloPORTER" to launch Data Exchange.
Note: If wizard is not automatically launched, open Data Exchange manually
7. Select the source as 'Sentek Plus/Multi/Solo (Folder)'
8. Select logger ID by clicking 'get list'
9. Select destination as 'IrriMAX Database (sdb)'
10. If downloading for the first time browse to the location you want the database saved and type in a database
name. If you are downloading into an already created database Browse to the location of the database on
your computer.
11. Click "Start"
Copyright © 2008-2012 Sentek Pty Ltd All rights reserved
See Data Exchange online help for more information on downloading.
error light descriptions
Note:
System Setup
Downloading Readings from Probe
Page 13