Sentek Solo Head Unit - Sentek EnviroSCAN SOLO Hardware Manual

Sentek SOLO Head Unit

1. Remove the battery caps that sit in front of the battery tubes at the base of the Head Unit as indicated below, a
small coin may be useful to help unscrew the battery caps:
2. Insert the AA alkaline or lithium batteries into the battery tubes making certain that the batteries are inserted in
the correct orientation as illustrated on the face of the Head Unit.
Note: Beware of batteries that do not have the labels 'Alkaline' or 'Lithium' as they are often
Zinc-Carbon or Zinc-Chloride. Although these could be marked as 'heavy duty' or 'super heavy
3. Place the battery caps back onto the battery tubes (as previously, a small coin may be useful for this step):
Copyright © 2008-2012 Sentek Pty Ltd All rights reserved
duty' they are vastly inferior to Alkaline and Lithium batteries
System Setup
Hardware Setup
Page 5