UniPatch
Bantam Audio Modules
The bantam audio jack modules for the
UniPatch
system are perfectly designed
®
for professional digital and analog audio
applications. Up to 32 modules plug into
the UniPatch chassis to provide a 64-circuit
(128 jacks) configuration when fully loaded,
matching typical router configurations. Each
module contains two circuits and four WECO-
standard precision bantam jacks designed for
long life. High-performance switches allow
flexible normalling and grounds for each circuit.
Large .440" x .325" designations provide
enough room for three lines of text.
Features
•
High-density, selectable normals, and excellent reliability
•
33 percent higher density than conventional frame-type bantam bays. Up to 32 cards in a frame with
2 circuits (4 jacks) per card for a total of 64 circuits (128 jacks)
•
32-across spacing exactly matches typical router configurations and provides larger designation area
•
Switch-selectable normals and grounds for each circuit: normals strapped (NS), half-normal (HN), bussed
ground (BG), or no normals (NN)
•
WECO-standard jacks meet or exceed MIL-STD-202 for mechanical durability as well as corrosion, salt spray,
thermal shock, moisture resistance, and vibration
•
Precision-molded housing and sturdy, integrated all metal springs rated for 10,000 insertion/withdrawal
cycles. Gold crossbar, self-cleaning contacts ensure a positive connection
•
Modular termination options: QCP II, EDAC 3-pin plug, EDAC 90-pin plug, DB-25, AMP Champ 50-pin
receptacle, or QCP IV with 4-foot umbilical Ultra Patch panel
•
Snap-on designation holders accept individual labels without tools; conventional chassis-wide designation
strips are also available. Large designations provide enough room for three lines of text
•
Fully compliant 110
w w w . a d c . c o m
•
Modular System
®
W circuit board meets demanding AES specifications
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
Precision Impedance Matched DIP Switch
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
Two circuits per card
90