UniPatch
RS-422 Modules
The UniPatch
Category 3 compliant RS-422
®
module raises the standard in machine control
patching with its quality and robust design. Now
you can patch machine control data properly
using reliable, durable, military-grade jacks rated
for 30,000 insertion/withdrawal cycles. Each
circuit switches all ten pins, making the module
fully SMPTE 207M compliant. Compared to other
systems employing light-duty RJ45 connectors
rated at fewer than 500 insertion/withdrawal
cycles or bantam jacks that do not switch all
signal lines, the UniPatch RS-422 module is a
significant advance in machine control patching.
Features
•
The standard in professional data patching
•
Durable military-grade switch system rated for 30,000 insertion/withdrawal cycles. Unlike RJ45 systems,
suitable for heavy daily professional use.
•
Fully SMPTE 207M compliant circuits switch all ten pins, unlike bantam systems, which do not switch all
ground pins, potentially causing problems
•
Tough military-grade, gold-plated switch with long cantilever beam springs and unique self-wiping contacts
ensures against premature wear and provides positive contact force
•
RS-422 cards offer the highest density available. Up to 32 modules in two rack units for 33 percent
greater density
•
Normalled or non-normalled cards available
•
Modular termination options: Dsub9, DB-25, EDAC 90-pin plug, QCP II, Ultra Patch, standard-density,
24 per frame, or Dsub9 high-density, 32 per frame (requires thin shell strain relief)
•
Keyed for proper patch cord orientation
•
Category 3 compliant for 10 Base-T data
w w w . a d c . c o m
•
Modular System
®
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
89