UniPatch
AES Balun Modules
The patented AES 110 W to 75 W balun modules
provide precision impedance matching for
interfacing balanced twisted pair AES audio to
unbalanced coaxial audio. Eliminate the nuisance
of XLR soldering and the mess of baluns hanging
from equipment. Replace them with this clean,
simple solution.
AES 110 W to 75 W Converter
(AM-411075-E3-FF)
AES 110 W to
75 W Converter
(AM-411075-MKII)
UniPatch System fully loaded with 16 AES balun modules for 64 110-75 W circuits
w w w . a d c . c o m
•
Modular System
®
AES 2:4 Splitter
(AM-2110-475-E3)
(front view)
(allows modules to be mounted either way)
For in-line baluns, see page 75
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
Features
•
Mounts on side of equipment rack with velcro
or can be rack mounted
•
Modules contain four circuits for up to 64
circuits per 2 RU chassis
•
Works with quick-to-install QCP punchdown
termination modules or EDAC 3-pin plug
•
1 Vp-p plug-in pad is available for equipment
that cannot accept high-input voltages.
Plug-in pad feature allows each circuit to
be tailored for 1 Vp-p operation in 1dB
increments to -20dB
•
New splitter module provides 2-in/4-out
passive split/110 W to 75 W converter
Precision Transformers,
Glass Epoxy Circuit Board,
True 75 W BNC Connectors
(rear view)
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
92