Adjusting The Camera Position - JVC VN-T216VPRU Quick Manual

Adjusting the Camera Position

The dome camera has three axes for positioning the camera. While monitoring the picture on the
monitor, adjus t the camera position as follows:
Pan Adjustment (A) For Wall Mount and Tilted Ceilings Rotate the lens base
(maximum360° ) until you are satisfied with the field of view.
Horizontal Rotation (B) Rotate 3D assembly in the base. Do not turn assembly more than
360° as this assembly may cause the internal cables to twist and disconnect or break.
Tilt Adjustment (C) After loosening the thumbnuts, position the camera as desired, then
finger –tighten the thumbnuts to set the position.
Do not turn the lens more than 360° as this may cause internal cables to
Caution
disconnect or break.
Retighten the locking screws to prevent loss of adjustment.
Caution
5