2.3 Mounting the Camera
1.
Attach the mounting template to the wall or ceiling.
2.
Drill two holes, then insert the screw anchors
3.
Secure the bottom case to the wall or ceiling with the TP4 x 15 mm tapping screws supplied
Recommendation:
To prevent the camera from falling off, we suggest tightening a safety wire
wall). This safety wire is not supplied.
Note
Depending on the material of your mounting surface, you may require different screws and
anchors than those supplied.
①
Please tighten a
safety wire on a firm
place as photo.
F
2.2 M
IGURE
OUNTING THE
8
into the holes.
③
1. Screw anchors (x2), supplied.
2. TP4 x 15 tapping screws (x2),
supplied
3. Safety Wire (fall prevention wire,
not supplied)
C
AMERA
②.
to a firm place (ceiling slab or
①
③
②