Camera Installation Procedures; Mounting The Camera - JVC TK-C686E Installation Manual

Connection/Installation
Camera Installation
Procedures
Install the camera with the following procedures.
Preparation (A Page 12)
K
Mounting the ceiling clamping bracket (A Page 15)
K
Mounting the camera (A Page 15)
12

Mounting the Camera

Preparation
Be sure to put on protective glasses to protect your eyes
from falling objects when mounting on the ceiling.
1
Make holes on the ceiling
● Use the provided template to make a hole (R80) for the
connection cables to thread behind the ceiling.
● If necessary, also open a screw hole to mount the
ceiling clamping bracket to the ceiling. In this case,
align the AD FRONT markB of the template in the
direction where the camera faces front and open the
screw hole.
2
Pull the cables from the hole in the ceiling
Pull out the fall prevention wire, power cable, coaxial cable,
control signal cable, alarm signal cable and provided alarm
cable that were mounted to the ceiling slab from the wall.
80
1
Safety wire
Coaxial cable
Alarm signal cable
3
Remove the terminal cover
Loosen two screws on the ceiling clamping bracket and
remove the terminal cover.
Power cable
Control signal cable
2
Terminal cover