Add An Rfid Card To The Mobile App - ABB Terra AC Series Installation Manual

Procedure
1. Find your pin code in the package with the RFID card.
•
•
2. Download the ChargerSync App from the Play Store or App Store.
3. Start the mobile app.
4. Do the instructions that the mobile app shows.
8.5

Add an RFID card to the mobile app

Preliminary requirements
Procedure
1. Go to the
2. Press
3. Hold the RFID card against the RFID reader of the EVSE.
•
•
•
•
4. Make sure that the data are correct.
5. To add a new RFID card, do these steps:
a. Select
b. Do steps 1 to 3 of this procedure again.
BCM.V3Y01.0-EN | 001
The pin code has 8 characters.
The letters are case-sensitive.
• RFID card
• Mobile device with the mobile app
Add Card menu in the mobile app.
Add Card .
The binding process starts.
The screen of the mobile app shows the status of the binding process.
When the binding process is completed, the mobile app shows 'done'.
My Cards page shows the name or the number of the EVSE in the overview
The
of the added RFID cards.
+ .
Commissioning
39