ABB Terra AC Series Installation Manual page 37

6. Connect the new EV charge cable:
a. Connect the wires.
b. Tighten the screws (B) to the correct torque. For the specification, refer to section
c. Connect the EV charger 2-pin connector that is receptable to the CP/PP
7. Prepare for operation:
a. Install the plastic cover.
b. Install the maintenance cover. Refer to section
c. Install the cabinet cover. Refer to section
BCM.V3Y01.0-EN | 001
11.16
.
connector.
Electrical installation
9.4
.
9.2
.
37