Adding Water; Brewing Hot Water; Purging The Brewer - Keurig K-CUP K150P Owner's Manual

adding Water

Your brewer has been configured at the factory to be direct plumbed,
however, the brewer can also be converted into a pour over model
with a Cold Water Tank Spare Part. To order, please call 1.888.CUP.BREW
(287.2739).

Brewing hot Water

Your brewer is able to produce hot water for
making hot cocoa from a packet, or for use in
cooking, for making soups, etc. Simply follow
the instructions on page 7, "Ready To Brew
Your First Cup" without adding a K-Cup
NOTE: After brewing a hot cocoa pack, we
recommend running a hot water brew cycle
without a K-Cup pack.
®
pack.
®

Purging the Brewer

If your brewer has not been used for more than
8
fig. one week, you should purge the water from the
internal water tank.
1.
Place Mug,
Select
Brew Size
2.
4 Oz.
3.
6 Oz. 8 Oz.
10 Oz. 12 Oz.
4.
5.
9
Follow Draining the Brewer instructions
on page 17.
Once drained, re-connect brewer to power
source and turn on.
When the brewer indicates "READY", place
a large mug on the Drip Tray and select
Large Mug (10 oz. serving) brew size from
the Select Brew Size Menu (fig. 8).
Discard water.
Repeat steps 2 - 4 two more times to
completely purge water from the Internal
Hot Water Tank.