Stopping The Brew Process - Keurig K-CUP K150P Owner's Manual

Set-Up & First Brew (continued)
SECTION 1
Lower the Handle to close the Lid over the
5.
4
fig.
K-Cup
completely, the BREW Button will flash up to 60
seconds).
Place a mug on the drip tray and select
6.
your brew size (fig. 6), then press BREW (fig. 7).
NOTE: If you do not press BREW within 60
seconds the brewer will return to its idle state
and the Brew Button will cease to flash to prevent
accidental activation. Re-activate by raising the
handle fully and then closing it.
There may be a short pause prior to coffee
7.
being dispensed. The entire brew process
lasts for approximately 1 minute and ends
5
fig.
with a burst of air to remove all liquid from the
K-Cup
CAUTION: There is extremely hot water in the
K-Cup
To avoid risk of injury, do not lift the Handle
or open the K-Cup
during the brew process.
The end of brew is indicated by "KEURIG
8.
BREWED ENJOY".
Lift the Handle, remove and dispose
9.
of the used K-Cup
CAUTION: K-Cup
Pack Holder. (When it is closed
®
pack.
®
Pack Holder during the brew process.
®
Pack Assembly Housing
®
pack.
®
pack will be hot.
®
6
fig.
Place Mug,
Select
Brew Size
4 Oz.
6 Oz. 8 Oz.
10 Oz. 12 Oz.

Stopping the Brew Process

If you need to stop the brewing after the process has started, press and
release the Power Switch to turn the brewer 'OFF'. The flow of coffee, tea or
hot cocoa will stop and the heating element and the LCD Screen will shut off.
NOTE: You may get more coffee, tea or hot cocoa in your cup during your next
brew. We recommend that you perform a cleansing brew with water only after
a terminated brew. Then your next brew will be the volume you have selected.
8
Enjoy your first cup of Keurig Brewed
10.
gourmet coffee, tea or hot cocoa!
Your brewer may display "HEATING
11.
PLEASE WAIT" as it heats water for
the next brew cycle.
7
fig.
®