Loading Network Drivers - 3Com III User Manual

4
L
OADING
D
RIVERS
This chapter describes how to load the network drivers
required to let the 3C592 EISA adapter operate with your
network operating system. Figure 4-1 shows an overview of
these procedures.
1
Locate network drivers.
2
Access DOS.
3
Load the drivers.
A
NetWare
(Client/server)
Figure 4-1 Overview of Loading Network Drivers
If you are running NetWare 2.x, 3.1x, or 4.x, you can use
3Com's AutoLink auto installation feature, which
automatically loads all the NetWare DOS ODI client software,
including drivers. Follow the instructions in the section
"Loading NetWare ODI Drivers."
If you are running Windows 95, you must import the driver
from the EtherDisk diskette. Follow the instructions in the
section "Loading Windows 95 Drivers" later in this chapter.
N
ETWORK
Windows 95
B
Non-NetWare
(NDIS or other)