3Com III User Manual page 10

A
BOUT
Introduction
This guide describes how to install the following 3Com
EtherLink III Parallel Tasking 10 Mbps EISA bus master
network adapters:
3C592-COMBO (10BASE-T, thin coax, and thick coax) adapter
3C592-TPO (10BASE-T) adapter
Also included is information about installing network drivers,
troubleshooting the adapter, and using the diagnostic tests if
an adapter malfunction occurs.
Throughout this guide, the product number 3C592
designates both members of the EtherLink III family of
10 Mbps EISA adapters.
How to Use This Guide
The following table shows where to find specific information
in this guide.
If you are looking for:
Information about the 3Com EISA bus master network
adapters
Instructions for installing the adapter
Procedures for connecting the adapter to the network
Instructions for configuring the adapter with the EISA
configuration utility
Procedures for changing software option settings
Instructions for installing network drivers
Details on troubleshooting and running the diagnostic tests
Information on adapter specifications, pin assignments, and
cabling requirements
Information on 3Com's technical support services
T G
HIS UIDE
Turn to:
Chapter 1
Chapter 2
Chapter 2
Chapter 3
Chapter 3
Chapter 4
Chapter 5
Appendix A
Appendix B