Table of Contents
Advertisement
2 Standards and directives
IDS Imaging Development Systems GmbH hereby confirms that this product has been developed, designed
and manufactured in compliance with the EC Directive 2014/30/EU (Electromagnetic Compatibility).
Compliance with the directives is demonstrated by meeting the following standards:
·
RoHS 2011/65/EC
·
REACh 1907/2006/EC
Product type
IDS NXT vegas
We, IDS Imaging Development Systems GmbH as manufacturer, hereby declare that the equipment with the
product name and model number specified above was tested conforming to the applicable FCC rules under the
most accurate measurement standards possible, and that all the necessary steps have been taken and are in
force to assure that production units of the same equipment will continue to comply with the Commissions
requirements.
3 Safety instructions
Read carefully the information in this chapter before installing and using the product. The producer is not
responsible for damages and injury, which can occur due to false handling of the product and ignoring the
safety instructions. All warranty will be spoiled in this case.
3.1 Intended use
IDS NXT vision app-based sensors are to be used to capture images for visualization and image processing
tasks. The devices are designed for use in industrial environments.
Please comply with the requirements for the proper use of this product. Failure to do so will render the warranty
void.
·
The product is not authorized for use in security relevant applications.If it used in security relevant
applications, the customer is responsible for the necessary approvals.
·
This product is not a toy and should be kept and operated out of reach of children.
·
If the product is modified or changed CE, FCC, and/or UL approval becomes invalid. In this case the
customer is responsible for ensuring product conformity.
·
Unauthorized opening of the camera housing voids the warranty. IDS Imaging Development Systems GmbH
assume no liability for defects if the product was improperly disassembled, reworked, or repaired by the
customer or a third party.
3.2 Installation, operation, and maintenance
The product must be connected, taken into operation and maintained only by appropriately qualified personnel.
The error-free and safe operation of this product can only be ensured if it is properly transported, stored, set up
and assembled, and operated and maintained with due care. The installation, inspection, maintenance,
extension, and repair may only be done by authorized personnel.
·
The IDS NXT vision app-based sensor must be installed in such way that the specifications are met which
are described in the manual.
·
Only operate the product under ambient conditions described in manual for the product. Carefully observe the
September 2018
EMC immunity
EN 61000-6-2:2005
Setup: IDS NXT vegas
EMC emission
EN 61000-6-4:2007 + A1:2011
4
Advertisement
Table of Contents
