Standards And Directives - IDS GigE uEye FA Technical Manual

4 Standards and directives

(only valid for devices with housing)
IDS Imaging Development Systems GmbH hereby confirms that this product has been developed, designed
and manufactured in compliance with the following European directives
·
2014/30/EU: EMC - Electromagnetic compatibility
·
2011/65/EU: RoHS - Restriction of the use of certain hazardous substances in electrical and electronic
equipment
·
Regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of
Chemicals (REACH)
·
The CE declaration of conformity is available on the
If the product is modified or changed all approval becomes invalid. In this case the customer is responsible for
ensuring product conformity.
Product type
Information for CE
EMC specifications
Information for USA
This equipment has been tested and found to comply with part 15 of
the FCC Rules.
Information for Canada
Renseignements pour le Canada
Information for UL
To be compliant with the UL safety criteria GigE cameras must be
operated with indoor networks only.
Further information
* Cameras are intended for use in industrial, residential, commercial and light industrial environments.
For customers in the USA
For a class B digital device:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
·
Reorient or relocate the receiving antenna.
·
Increase the separation between the equipment and Receiver.
·
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
·
Consult the dealer or an experienced radio/TV technician for help.
Name of Responsible Party
IDS Imaging Development Systems, Inc.
92 Montvale Ave., Ste 2800
Stoneham, MA 02180
U.S.A.
T: +1 781 787 0048
January 2020
Technical Manual: GigE uEye FA
IDS website.
GigE uEye FA
EN 61000-6-2
EN 61000-6-3*
EN 55032 (Class B)
Class B
CAN ICES-3 (B)/NMB-3(B)
UL 62368-1
CAN/CSA C22.2 No. 62368-1-14
KC (R-R-img-GIGEFA)
ChinaRoHS EFUP 25
7