9.4 Logging on to IDS NXT vision app-based sensor
Via the selection, select the user class that you want to use to log on to the device. There are three basic user
classes that are used.
Administrator
The administrator profile allows full access to the IDS NXT vision app-based sensor
configuration. Everything is possible, from firmware updates to installation and
adjustment of IDS NXT vision apps.
Service
This user profile can be used to perform service activities. Specified settings can be
changed, for example to respond to changed production specifications. These include
camera settings (brightness, focus, etc.) and settings for the IDS NXT vision apps.
User
This user profile provides shop floor employees, for example, with status information for
a IDS NXT vision app-based sensor so that they can directly find information about fault
conditions.
The passwords for the "admin" and "service" user classes are "ids" when delivered. They can be
changed using the administrator profile. No password is necessary for the "user" user class. How
to change passwords is described in the manual "IDS NXT – Operation".
9.5 Network configuration in IDS NXT Cockpit
After logging onto a IDS NXT vision app-based sensor you will see the "Dashboard", which displays a range of
device information. To set the network parameters select the network settings dialog ("Network") under
"Configuration".
September 2018
Several access profiles
Setup: IDS NXT vegas
12