Operation Instruction –Technical Parameter - Jack A Series Manual

Operation Instruction –technical parameter
1、 In standby mode, the long press P key enters the parameter mode；
2、 presse
3、The parameter interface flickers when the parameter value is
modified.At this time, press the P key, save the modified parameter, and
then briefly press the P key to exit the parameter interface and return
the standby page.
Param Paramete
ete
r range
r
num
ber
P 0 1 200~5000
P 0 3 0/1
P 0 4 200~3000
P 0 5 200~3000
P 0 6 200~3000
P 0 9 0/1
P 1 5 0/1/2
项目名称 | 日期
PROJECT NAME | date
and to change parameter
Factor
y
settin
g
4000
the maximum speed of free sewing
1
Needle stop position selection (0:up; 1: down)
1800
Start back tacking speed
1800 End back tacking speed
1800
Continuous back sewing speed (W sewing)
0
Soft start switch (0:off; 1: on)
0
Mode of adding stitch
0: continuous；1:half stitch；2:one stitch
Description
CONFIDENTIAL 19