Parameter Mode Introduction - Jack C4 Training Courseware

Operating Instructions
1. User parameter mode MOV
In the standby interface, press the P ( ) key 1.5S, enter the user parameter mode adjustment:
through the key,
to adjust the corresponding parameter value.
The user parameter mode is from P01 to P25.
2. Technician parameter mode MOV
In the standby interface, press P (
parameter mode
Adjustment: by key
to adjust the corresponding parameters
Numerical values. The user parameter mode is from P26-P68.
3. System parameter mode MOV
Press the P ( ) key + the up key (
111 (respectively
Corresponding key
through the key
And key to modify the parameter adjustment items, through the key
corresponding parameter values. user
The parameter pattern is from P69 to P79.
Key to modify the parameter adjustment item, through the key
) + presser foot lifter (
, key to modify the parameter adjustment items, through the key
) 1.5S in the standby interface and enter the password
, key , key

- Parameter mode introduction

), enter the technician parameter mode adjustment:
) 1.5S, enter the technician
to adjust the
, key
, key